VNX trespassed luns command line

EMC Command line find and remedy trespassed luns (this is being run on a EMC VNX 7500)

To list all of the luns that are trespassed on your array run (example output below)

NaviSECCli.exe -h -user sysadmin -password sysadmin -scope 0 getlun -trespass
Default Owner:              SP B
Current owner:              SP A

Ok so now you want to fix the trespass how do you do that?

NaviSECCli.exe -h -user sysadmin -password sysadmin -scope 0 trespass mine
NaviSECCli.exe -h -user sysadmin -password sysadmin -scope 0 trespass mine

So what is that last command doing and why am I running it twice?

The trespass command “Trespasses one or more LUNs to the control of an SP” and the “mine” option “Performs whatever trespassing is necessary to take all of the LUNs that have this SP as
a default owner.” Since you might have luns failed over from both SP’s you run it on each sp to have that SP grab control back of its own lun.

Additional note you can run this command from your Celerra or VNX File /nas/sbin/navicli -h getlun -trespass

This entry was posted in Clariion, EMC, Storage Arrays, VNX Block. Bookmark the permalink.

3 Responses to VNX trespassed luns command line

  1. Scott says:

    Hi there, great post.
    the trespass commands have a typo – “tresspass” shouldn’t have the extra ‘s’.

  2. leniuch says:

    /nas/bin/nas_storage -failback S/N

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s